Previously, a flag was set to indicate that a lock release should wake up
waiters. Since waking waiters is the default behavior in the majority of
cases, this logic has been inverted. The new LW_FLAG_WAKE_IN_PROGRESS flag is
now set iff wakeups are explicitly inhibited.
The motivation for this change is that in an upcoming commit, content locks
will be implemented independently of lwlocks, with the lock state stored as
part of BufferDesc.state. As all of a buffer's flags are cleared when the
buffer is invalidated, without this change we would have to re-add the
RELEASE_OK flag after clearing the flags; otherwise, the next lock release
would not wake waiters.
It seems good to keep the implementation of lwlocks and buffer content locks
as similar as reasonably possible.
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/4csodkvvfbfloxxjlkgsnl2lgfv2mtzdl7phqzd4jxjadxm4o5@usw7feyb5bzf
RangeTblEntry.groupexprs was marked with the node attribute
query_jumble_ignore, causing a list of GROUP BY expressions to be
ignored during the query jumbling. For example, these two queries could
be grouped together within the same query ID:
SELECT count(*) FROM t GROUP BY a;
SELECT count(*) FROM t GROUP BY b;
However, as such queries use different GROUP BY clauses, they should be
split across multiple entries.
This fixes an oversight in 247dea89f7, that has introduced an RTE for
GROUP BY clauses. Query IDs are documented as being stable across minor
releases, but as this is a regression new to v18 and that we are still
early in its support cycle, a backpatch is exceptionally done as this
has broken a behavior that exists since query jumbling is supported in
core, since its introduction in pg_stat_statements.
The tests of pg_stat_statements are expanded to cover this area, with
patterns involving GROUP BY and GROUPING clauses.
Author: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxEy2W+tCqC7XuJ94r3ivWsM=onKJp94kRFx3hoARjBeFQ@mail.gmail.com
Backpatch-through: 18
The test script added by commit e1c971945d failed to handle the case
of cache-clobbering builds (CLOBBER_CACHE_ALWAYS and
CATCACHE_FORCE_RELEASE) properly -- it would only exit a loop on
timeout, which is slow, and unfortunate because I (Álvaro) increased the
timeout for that loop to the complete default TAP test timeout, causing
the buildfarm to report the whole test run as a timeout failure. We can
be much quicker: exit the loop as soon as the backend is seen as waiting
on the injection point.
In this commit we still reduce the timeout (of that loop and a nearby
one just to be safe) to half of the default.
I (Álvaro) had also changed Mihail's "sleep(1)" to "sleep(0.1)", which
apparently turns a 1s sleep into a 0s sleep, because Perl -- probably
making this a busy loop. Use Time::HiRes::usleep instead, like we do in
other tests.
Author: Mihail Nikalayeu <mihailnikalayeu@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/CADzfLwWOVyJygX6BFuyuhTKkJ7uw2e8OcVCDnf6iqnOFhMPE%2BA%40mail.gmail.com
There are two reasons for doing so:
1) It is generally faster to perform checks in a batched fashion and making
sequential scans faster is nice.
2) We would like to stop setting hint bits while pages are being written
out. The necessary locking becomes visible for page mode scans, if done for
every tuple. With batching, the overhead can be amortized to only happen
once per page.
There are substantial further optimization opportunities along these
lines:
- Right now HeapTupleSatisfiesMVCCBatch() simply uses the single-tuple
HeapTupleSatisfiesMVCC(), relying on the compiler to inline it. We could
instead write an explicitly optimized version that avoids repeated xid
tests.
- Introduce batched version of the serializability test
- Introduce batched version of HeapTupleSatisfiesVacuum
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/6rgb2nvhyvnszz4ul3wfzlf5rheb2kkwrglthnna7qhe24onwr@vw27225tkyar
To be able to guarantee that we can set the hint bit, acquire an exclusive
lock on the old buffer. This is required as a future commit will only allow
hint bits to be set with a new lock level, which is acquired as-needed in a
non-blocking fashion.
We need the hint bits, set in heapam_relation_copy_for_cluster() ->
HeapTupleSatisfiesVacuum(), to be set, as otherwise reform_and_rewrite_tuple()
-> rewrite_heap_tuple() will get confused. Specifically, rewrite_heap_tuple()
checks for HEAP_XMAX_INVALID in the old tuple to determine whether to check
the old-to-new mapping hash table.
It'd be better if we somehow could avoid setting hint bits on the old page. A
common reason to use VACUUM FULL is very bloated tables - rewriting most of
the old table during VACUUM FULL doesn't exactly help.
Reviewed-by: Heikki Linnakangas <heikki.linnakangas@iki.fi>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/4wggb7purufpto6x35fd2kwhasehnzfdy3zdcu47qryubs2hdz@fa5kannykekr
Before this commit fsm_vacuum_page() modified the page without any lock on the
page. Historically that was kind of ok, as we didn't rely on the freespace to
really stay consistent and we did not have checksums. But these days pages are
checksummed and there are ways for FSM pages to be included in WAL records,
even if the FSM itself is still not WAL logged. If a FSM page ever were
modified while a WAL record referenced that page, we'd be in trouble, as the
WAL CRC could end up getting corrupted.
The reason to address this right now is a series of patches with the goal to
only allow modifications of pages with an appropriate lock level. Obviously
not having any lock is not appropriate :)
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/4wggb7purufpto6x35fd2kwhasehnzfdy3zdcu47qryubs2hdz@fa5kannykekr
Discussion: https://postgr.es/m/e6a8f734-2198-4958-a028-aba863d4a204@iki.fi
Doing this meant that those two headers, which are supposed to be
internal to their corresponding index AMs, were being included pretty
much universally, because tuplesort.h is included by execnodes.h which
is very widely used. Stop that, and fix fallout.
We also change indexing.h to no longer include execnodes.h (tuptable.h
is sufficient), and relscan.h to no longer include buf.h (pointless
since c2fe139c20).
Author: Mario González <gonzalemario@gmail.com>
Discussion: https://postgr.es/m/CAFsReFUcBFup=Ohv_xd7SNQ=e73TXi8YNEkTsFEE2BW7jS1noQ@mail.gmail.com
The dmetaphone() SQL function internally upper-cases the argument
string. It did this using the toupper() function. That way, it has a
dependency on the global LC_CTYPE locale setting, which we want to get
rid of.
The "double metaphone" algorithm specifically supports the "C with
cedilla" letter, so just using ASCII case conversion wouldn't work.
To fix that, use the passed-in collation and use the str_toupper()
function, which has full awareness of collations and collation
providers.
Note that this does not change the fact that this function only works
correctly with single-byte encodings. The change to str_toupper()
makes the case conversion multibyte-enabled, but the rest of the
function is still not ready.
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://www.postgresql.org/message-id/108e07a2-0632-4f00-984d-fe0e0d0ec726%40eisentraut.org
Previously the instrumentation logic always converted to seconds, only for
many of the callers to do unnecessary division to get to milliseconds. As an
upcoming refactoring will split the Instrumentation struct, utilize instrtime
always to keep things simpler. It's also a bit faster to not have to first
convert to a double in functions like InstrEndLoop(), InstrAggNode().
Author: Lukas Fittl <lukas@fittl.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAP53PkzZ3UotnRrrnXWAv=F4avRq9MQ8zU+bxoN9tpovEu6fGQ@mail.gmail.com
This formerly said "unique constraint must ...", which was accurate
enough when it only applied to UNIQUE and PRIMARY KEY constraints.
However, now we use it for exclusion constraints too, and in that
case it's a tad confusing. Do what we already did in the errdetail
message: print the constraint_type, so that it looks like "UNIQUE
constraint ...", "EXCLUDE constraint ...", etc.
Author: jian he <jian.universality@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CACJufxH6VhAf65Vghg4T2q315gY=Rt4BUfMyunkfRj0n2S9n-g@mail.gmail.com
Since commit bd15b7db48, pg_dump uses pg_get_sequence_data() (née
pg_sequence_read_tuple()) to gather all sequence data in a single
query as opposed to a query per sequence. Two related bugs have
been identified:
* If the user lacks appropriate privileges on the sequence, pg_dump
generates a setval() command with garbage values instead of
failing as expected.
* pg_dump can fail due to a concurrently dropped sequence, even if
the dropped sequence's data isn't part of the dump.
This commit fixes the above issues by 1) teaching
pg_get_sequence_data() to return nulls instead of erroring for a
missing sequence and 2) teaching pg_dump to fail if it tries to
dump the data of a sequence for which pg_get_sequence_data()
returned nulls. Note that pg_dump may still fail due to a
concurrently dropped sequence, but it should now only do so when
the sequence data is part of the dump. This matches the behavior
before commit bd15b7db48.
Bug: #19365
Reported-by: Paveł Tyślacki <pavel.tyslacki@gmail.com>
Suggested-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19365-6245240d8b926327%40postgresql.org
Discussion: https://postgr.es/m/2885944.1767029161%40sss.pgh.pa.us
Backpatch-through: 18
This is important for Postgres extensions that are written in C++,
such as pg_duckdb, which uses PGXS as the build system currently. In
the autotools build, C++ is not coupled to LLVM. If the autotools
build is configured without --with-llvm, the C++ compiler and the
various flags get persisted into the Makefile.global.
Author: Tristan Partin <tristan@partin.io>
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Discussion: https://www.postgresql.org/message-id/flat/D98JHQF7H2A8.VSE3I4CJBTAB%40partin.io
When creating a partition for a RANGE partitioned table, the reporting
of errors relating to converting the specified range values into
constant values for the partition key's type could display the name of a
previous partition key column when an earlier range was specified as
MINVALUE or MAXVALUE.
This was caused by the code not correctly incrementing the index that
tracks which partition key the foreach loop was working on after
processing MINVALUE/MAXVALUE ranges.
Fix by using foreach_current_index() to ensure the index variable is
always set to the List element being worked on.
Author: myzhen <zhenmingyang@yeah.net>
Reviewed-by: zhibin wang <killerwzb@gmail.com>
Discussion: https://postgr.es/m/273cab52.978.19b96fc75e7.Coremail.zhenmingyang@yeah.net
Backpatch-through: 14
In the wake of the previous commit, this script will fail
if executed via CREATE EXTENSION, so it's useless. Remove it,
but keep the delta scripts, allowing old (even very old)
versions of the btree_gist SQL objects to be upgraded to 1.9
via ALTER EXTENSION UPDATE after a pg_upgrade.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/2483812.1754072263@sss.pgh.pa.us
This patch completes the transition to making inet_ops be default for
inet/cidr columns, rather than btree_gist's opclasses. Once we do
that, though, pg_upgrade has a big problem. A dump from an older
version will see btree_gist's opclasses as being default, so it will
not mention the opclass explicitly in CREATE INDEX commands, which
would cause the restore to create the indexes using inet_ops. Since
that's not compatible with what's actually in the files, havoc would
ensue.
This isn't readily fixable, because the CREATE INDEX command strings
are built by the older server's pg_get_indexdef() function; pg_dump
hasn't nearly enough knowledge to modify those strings successfully.
Even if we cared to put in the work to make that happen in pg_dump,
it would be counterproductive because the end goal here is to get
people off of these opclasses. Allowing such indexes to persist
through pg_upgrade wouldn't advance that goal.
Therefore, this patch just adds code to pg_upgrade to detect indexes
that would be problematic and refuse to upgrade.
There's another issue too: even without any indexes to worry about,
pg_dump in binary-upgrade mode will reproduce the "CREATE OPERATOR
CLASS ... DEFAULT" commands for btree_gist's opclasses, and those
will fail because now we have a built-in opclass that provides a
conflicting default. We could ask users to drop the btree_gist
extension altogether before upgrading, but that would carry very
severe penalties. It would affect perfectly-valid indexes for other
data types, and it would drop operators that might be relied on in
views or other database objects. Instead, put a hack in DefineOpClass
to ignore the DEFAULT clauses for these opclasses when in
binary-upgrade mode. This will result in installing a version of
btree_gist that isn't quite the version it claims to be, but that can
be fixed by issuing ALTER EXTENSION UPDATE afterwards.
Since we don't apply that hack when not in binary-upgrade mode,
it is now impossible to install any version of btree_gist
less than 1.9 via CREATE EXTENSION.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/2483812.1754072263@sss.pgh.pa.us
btree_gist's gist_inet_ops and gist_cidr_ops opclasses are
fundamentally broken: they rely on an approximate representation of
the inet values and hence sometimes miss rows they should return.
We want to eventually get rid of them altogether, but as the first
step on that journey, we should mark them not-opcdefault.
To do that, roll up the preceding deltas since 1.2 into a new base
script btree_gist--1.9.sql. This will allow installing 1.9 without
going through a transient situation where gist_inet_ops and
gist_cidr_ops are marked as opcdefault; trying to create them that
way will fail if there's already a matching default opclass in the
core system. Additionally provide btree_gist--1.8--1.9.sql, so
that a database that's been pg_upgraded from an older version can
be migrated to 1.9.
I noted along the way that commit 57e3c5160 had missed marking the
gist_bool_ops support functions as PARALLEL SAFE. While that probably
has little harmful effect (since AFAIK we don't check that when
calling index support functions), this seems like a good time to make
things consistent.
Readers will also note that I removed the former habit of installing
some opclass operators/functions with ALTER OPERATOR FAMILY, instead
just rolling them all into the CREATE OPERATOR CLASS steps. The
comment in btree_gist--1.2.sql that it's necessary to use ALTER for
pg_upgrade reproducibility has been obsolete since we invented the
amadjustmembers infrastructure. Nowadays, gistadjustmembers will
force all operators and non-required support functions to have "soft"
opfamily dependencies, regardless of whether they are installed by
CREATE or ALTER.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/2483812.1754072263@sss.pgh.pa.us
The only user-visible change is the fix in the "malformed
pg_dependencies" error detail. That one is new in commit e1405aa5e3,
so no backpatching required.
When repurposing a standby to a logical replica, pg_createsubscriber
uses for the new replica a set of configuration parameters saved into
postgresql.auto.conf, to force recovery patterns when the physical
replica is promoted.
While not wrong in practice, this approach can cause issues when forcing
again recovery on a logical replica or its base backup as the recovery
parameters are not reset on the target server once pg_createsubscriber
is done with the node.
This commit aims at improving the situation, by changing the way
recovery parameters are saved on the target node. Instead of writing
all the configuration to postgresql.auto.conf, this file now uses an
include_if_exists, that points to a pg_createsubscriber.conf. This new
file contains all the recovery configuration, and is renamed to
pg_createsubscriber.conf.disabled when pg_createsubscriber exits. This
approach resets the recovery parameters, and offers the benefit to keep
a trace of the setup used when the target node got promoted, for
debugging purposes. If pg_createsubscriber.conf cannot be renamed
(unlikely scenario), a warning is issued to inform users that a manual
intervention may be required to reset this configuration.
This commit includes a test case to demonstrate the problematic case: a
standby node created from a base backup of what was the target node of
pg_createsubscriber does not get confused when started. If removing
this new logic, the test fails with the standby not able to start due
to an incorrect recovery target setup, where the startup process fails
quickly with a FATAL.
I have provided the design idea for the patch, that Alyona has written
(with some code adjustments from me). This could be considered as a
bug, but after discussion this is put into the bucket for improvements.
Redesigning pg_createsubscriber would not be acceptable in the stable
branches anyway.
Author: Alyona Vinter <dlaaren8@gmail.com>
Reviewed-by: Ilyasov Ian <ianilyasov@outlook.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andrey Rudometov <unlimitedhikari@gmail.com>
Discussion: https://postgr.es/m/CAGWv16K6L6Pzm99i1KiXLjFWx2bUS3DVsR6yV87-YR9QO7xb3A@mail.gmail.com
The USER and IN GROUP clauses of CREATE ROLE are deprecated, and
commit 8e78f0a1 removed them from the CREATE ROLE syntax syntax
synopsis in the docs. However, previously CREATE USER and
CREATE GROUP docs still listed these clauses.
Since CREATE USER is equivalent to CREATE ROLE ... WITH LOGIN and
CREATE GROUP is equivalent to CREATE ROLE, their documented syntax
synopsis should match CREATE ROLE to avoid confusion.
Therefore this commit removes the deprecated USER and IN GROUP
clauses from the CREATE USER and CREATE GROUP syntax synopsis
in the docs.
Author: Japin Li <japinli@hotmail.com>
Reviewed-by: wenhui qiu <qiuwenhuifx@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/MEAPR01MB3031C30E72EF16CFC08C8565B687A@MEAPR01MB3031.ausprd01.prod.outlook.com
Commit c7eab0e97 changed the default password_encryption setting to
'scram-sha-256', so update the example for creating a user with an
assigned password.
In addition, commit 08951a7c9 added new options that in turn pass
default tokens NOBYPASSRLS and NOREPLICATION to the CREATE ROLE
command, so fix this omission as well for v16 and later.
Reported-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/cff1ea60-c67d-4320-9e33-094637c2c4fb%40iki.fi
Backpatch-through: 14
During catcache searches, the most-recently searched entries are kept at
the head of the list to speed up subsequent searches, keeping the
"freshest" entries at its beginning. A rehash of the catcache was doing
the opposite: fresh entries were moved to the tail of the newly-created
buckets, causing a rehash to slow down a bit.
When a rehash is done, this commit switches the code to use
dlist_push_tail() instead of dlist_push_head(), so as fresh entries are
kept at the head of the lists, not their tail.
Author: ChangAo Chen <cca5507@qq.com>
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/tencent_9EA10D8512B5FE29E7323F780A0749768708@qq.com
