webmin/fdisk/lang/en

index_title=Partition Manager
index_parted=Using <tt>parted</tt>
index_fdisk=Using <tt>fdisk</tt>
index_ecmd=You have selected to use the $1 command for partition management, but it is not installed on your system.
index_err=Failed to list disks
index_disk=Disk
index_parts=Partitions
index_location=Location
index_cylinders=Cylinders
index_size=Size
index_model=Model
index_raid=RAID level
index_controller=Controller
index_scsiid=Target
index_none=No partitions found
index_num=No.
index_type=Type
index_extent=Extent
index_start=Start
index_end=End
index_addpri=Add primary partition.
index_addlog=Add logical partition.
index_addext=Add extended partition.
index_hdparm=Edit IDE parameters
index_hdparmdesc=Change settings for an IDE drive, such as the DMA mode, standby timeout and number of sectors read.
index_smart=Show SMART status
index_smartdesc=Displays the status reported by this drive, including temperature and error rates.
index_blink=Identify drive
index_relabel=Wipe Partitions
index_relabeldesc=Delete all existing partitions and create a new partition table with a different format.
index_relabel2=Create Partition Table
index_relabeldesc2=Create a new empty partition table on this disk, so that partitions can be added.
index_use=Use
index_free=Free
index_return=disk list
index_dname=Disk name
index_dsize=Total size
index_dmodel=Make and model
index_dctrl=Controller
index_dacts=Actions
index_dhdparm=IDE parameters
index_dsmart=SMART status
index_dscsi=SCSI device $1 controller $2
index_draid=RAID level $1
index_dparts=Partitions
index_none2=No disks were found on this system.

bytes=bytes
megabytes=megabytes
extended=Extended
opt_default=Default
opt_error='$1' is not a valid $2
open_error=$1 command not found
select_device=$1 device $2
select_part=$1 device $2 partition $3
select_fd=Floppy disk $1
select_mylex=Mylex RAID $1 drive $2
select_mpart=Mylex RAID $1 drive $2 partition $3
select_cpq=Compaq RAID $1 drive $2
select_cpart=Compaq RAID $1 drive $2 partition $3
select_scsi=SCSI controller $1 bus $2 target $3 LUN $4
select_spart=SCSI controller $1 bus $2 target $3 LUN $4 partition $5
select_newide=IDE controller $1 bus $2 disk $3
select_snewide=IDE controller $1 bus $2 disk $3 partition $5
select_smart=Compaq Smart Array $1 drive $2
select_smartpart=Compaq Smart Array $1 drive $2 partition $3
select_promise=Promise RAID drive $1
select_ppart=Promise RAID drive $1 partition $2
select_nvme=NVME SSD $1 drive $2
select_nvmepart=NVME SSD $1 drive $2 partition $3

edit_title=Edit Partition
create_title=Create Partition
edit_ecannot=You are not allowed to edit this disk
edit_ehdparm=The <tt>hdparm</tt> executable could not be found in your system
edit_details=Partition Details
edit_location=Location
edit_device=Device file
edit_type=Type
edit_extent=Extent
edit_of=of
edit_status=Status
edit_cont1=Contains 1 partition
edit_cont234=Contains $1 partitions
edit_cont5=Contains $1 partitions
edit_mount=Mounted on $1 as $2
edit_umount=For mounting on $1 as $2
edit_mountvm=Mounted as virtual memory
edit_umountvm=For mounting as virtual memory
edit_mountraid=Part of RAID device $1
edit_mountlvm=Part of LVM volume group $1
edit_mountiscsi=iSCSI shared device $1
edit_notexist=Not created yet
edit_notused=Not in use
edit_size=Size
edit_label=Filesystem label
edit_name=Partition name
edit_volid=Volume ID
edit_blocks=$1 blocks
edit_inuse=This partition cannot be changed as it is currently in use or configured for use.
edit_eparted=This partition cannot be changed unless <tt>parted</tt> command is installed.
edit_eparted2=This partition cannot be changed unless <tt>parted</tt> is set as management command in module config.
edit_edisk=This disk cannot be edited unless <tt>parted</tt> command is installed.
edit_edisk2=This disk cannot be edited unless <tt>parted</tt> is set as management command in module config.
edit_mkfs=Create New Filesystem
edit_mkfs2=Create Filesystem:
edit_mkfsmsg=Builds a new $1 filesystem on this partition, permanently erasing any existing files. You must do this after creating a new partition or changing an existing one.
edit_mkfsmsg2=Builds a new filesystem of the selected type on this partition, permanently erasing any existing files. You must do this after creating a new partition or changing an existing one.
edit_fsck=Repair Filesystem
edit_fsckmsg=Calls the $1 program to repair a filesystem so that it can be mounted. This may be necessary if your system was not shut down properly.
edit_tune=Tune Filesystem
edit_tunemsg=Allows you to modify various parameters of an existing filesystem.
edit_none=None
edit_newmount=Mount Partition On:
edit_newmount2=Mount Partition
edit_mountas=as
edit_mountmsg=Mount this partition on new directory on your system, so that it can be used to store files. A filesystem must have been already created on the partition.
edit_mountmsg2=Mount this partition as virtual memory on your system, to increase the amount of memory available.

mkfs_title=New Filesystem
mkfs_ecannot=You are not allowed to build a new filesystem on this disk
mkfs_desc1=Clicking the button at the bottom of this form will build a new $1 filesystem on the device $2. All data on this partition will be permanently erased.
mkfs_desc2=This partition has been mounted on $1 as $2. Creating a new filesystem will erase all files that were previously accesible under this directory.
mkfs_options=Filesystem Options
mkfs_create=Create Filesystem
mkfs_err=Failed to create filesystem
mkfs_exec=Executing command $1 ..
mkfs_failed=.. command failed!
mkfs_ok=.. command complete.

fsck_title=Repair Filesystem
fsck_ecannot=You are not allowed to fsck this disk
fsck_desc1=Clicking the <tt>Repair Filesystem</tt> button will attempt to repair the damaged $1 filesystem on $2 for mounting on $3. If the filesystem is not damaged, no changes will be made.
fsck_desc2=Filesystem repairs will be done using the command $1, which will automatically attempt to fix any problems encountered. For more control over filesystem repairs, use the $2 command manually in interactive mode from the Unix prompt.
fsck_repair=Repair Filesystem
fsck_exec=Executing command $1 ..
fsck_err0=no errors detected
fsck_err1=errors found and corrected
fsck_err3=errors found and corrected - reboot needed
fsck_err4=errors found but NOT corrected
fsck_err16=command line error
fsck_unknown=unknown return code $1

tunefs_title=Tune Filesystem
tunefs_ecannot=You are not allowed to tune this filesystem
tunefs_desc=This form allows you to adjust various parameters of the $1 filesystem on $2 for mounting on $3. Existing files on this filesystem will not be affected.
tunefs_params=Tuning Parameters
tunefs_tune=Tune Filesystem
tunefs_c=Gaps between checks
tunefs_e=Action on error
tunefs_continue=Continue
tunefs_remount=Mount read-only
tunefs_panic=Panic
tunefs_u=Reserved user
tunefs_g=Reserved group
tunefs_m=Reserved blocks
tunefs_i=Time between checks
tunefs_days=Days
tunefs_weeks=Weeks
tunefs_months=Months
tunefs_err=Failed to tune filesystem
tunefs_exec=Executing command $1 ..
tunefs_failed=.. command failed!
tunefs_ok=.. command complete.

reboot_title=Reboot
reboot_msg=Rebooting now ..
reboot_ok=Reboot Now
reboot_why=You have changed the partition table on $1. For this change to take effect properly, your system must be rebooted.

save_err=Failed to save partition
save_ecannot=You are not allowed to edit this disk
save_estart='$1' is not a valid starting cylinder
save_eend='$1' is not a valid ending cylinder
save_emin=The starting cylinder must be >= $1
save_emax=The ending cylinder must be <= $1
save_eminmax=The starting cylinder must be less than the ending
save_eoverlap=Overlap detected with partition $1 ($2 to $3)

ext2_b=Block size
ext2_f=Fragment size
ext2_i=Bytes per inode
ext2_m=Reserved blocks
ext2_g=Blocks per group
ext2_c=Check for bad blocks?
ext3_j=Journal file size

msdos_ff=Number of FATs
msdos_F=FAT size
msdos_F_other=Other..
msdos_i=Volume ID
msdos_n=Volume name
msdos_r=Root entries
msdos_s=Cluster size
msdos_c=Check for bad blocks?

minix_n=Filename length
minix_i=Number of inodes
minix_b=Number of blocks
minix_c=Check for bad blocks?

reiserfs_force=Force filesystem creation
reiserfs_hash=Hash function

xfs_force=Force filesystem creation
xfs_b=Block size

jfs_s=Log size
jfs_c=Check for bad blocks?

btrfs_l=Leaf size
btrfs_n=Node size
btrfs_s=Sector size

fatx_none=No options are available for FATX filesystems.

acl_disks=Disks this user can partition and format
acl_dall=All disks
acl_dsel=Selected..
acl_view=Can view non-editable disks?

hdparm_title=Edit IDE Parameters
hdparm_on=On
hdparm_off=Off
hdparm_label=IDE Drive Settings
hdparm_conf_X=Transfer mode
hdparm_conf_X_defaut=Default mode
hdparm_conf_X_disable=Disable IORDY
hdparm_conf_d=Using DMA
hdparm_conf_a=Sector count
hdparm_conf_A=Read-lookahead
hdparm_conf_W=Write caching
hdparm_conf_u=Interrupt unmask
hdparm_conf_k=Keep settings over reset
hdparm_conf_K=Keep features over reset
hdparm_conf_r=Read only
hdparm_conf_P=Reprogram best PIO
hdparm_conf_S=Standby timeout
hdparm_conf_c=32-bit I/O support
hdparm_conf_m=Sector count for multiple sector I/O
hdparm_disable=Disable
hdparm_enable=Enable
hdparm_enable_special=Enable with special sync sequence
hdparm_apply=Apply to Drive
hdparm_speed=Test Speed
hdparm_performing=Performing
hdparm_buf1=Buffer cache:
hdparm_buf2=Buffered:
hdparm_speedres=Speed test results

blink_title=Identify Drive
blink_desc=The activity LED of the drive will now light sixty times
blink_back=Go Back

log_modify=Modified $1
log_create=Created $1
log_delete=Deleted $1
log_mkfs=Created $1 filesystem on $2
log_tunefs=Tuned $1 filesystem on $2
log_fsck=Repaired $1 filesystem on $2
log_hdparm=Modified IDE parameters for $1

fs_ext2=Old Linux Native
fs_minix=Minix
fs_msdos=MS-DOS
fs_vfat=Windows
fs_reiserfs=ReiserFS
fs_ext3=Linux Native
fs_ext4=New Linux Native
fs_xfs=SGI
fs_jfs=IBM Journalling
fs_btrfs=BTR

delete_title=Delete Partition
delete_rusure=Are you sure you want to delete $1 ( $2 ) ? Data on this partition may be lost forever.
delete_ok=Delete Now

disk_title=Edit Disk Partitions
disk_egone=Disk no longer exists!
disk_no=Number
disk_type=Type
disk_extent=Extent
disk_start=Start
disk_end=End
disk_use=Used by
disk_free=Free space
disk_vm=Virtual memory
disk_iscsi=iSCSI shared device $1
disk_none=This disk has no partitions yet.
disk_size=Size
disk_dsize=<b>Disk size:</b> $1
disk_model=<b>Make and model:</b> $1
disk_cylinders=<b>Cylinders:</b> $1
disk_table=<b>Partition table format:</b> $1
disk_notable=<b>Partition table format:</b> None created
disk_needtable=No partitions can be created without a partition table.
disk_return=list of partitions

relabel_title=Wipe Partitions
relabel_warn=Are you sure you want to wipe all partitions on $1 ($2) by re-writing the disk label? All existing data and filesystems will be lost!
relabel_parts=Existing partitions
relabel_noparts=None created yet
relabel_table=Partition table format
relabel_ok=Wipe and Re-Label

table_msdos=MS-DOS (Standard partition format)
table_gpt=GPT (For 2T or larger disks)

__norefs=1